Drillmate products
-
VACUUM BASE is supplied vacuum from an air generated venturi, giving the base 110kgs of holding power to a clean flat surface. It can be operated with a small compressor, providing it can supply 450kPa (65psi) pressure continuous, when operating with an electric or battery drill. Maximum pressure of 60kgs can be applied to the surface being drilled. When operating with an air drill, the compressed air flow has to be of maximum pressure of 700kPa (100psi) and the base has a port available, controlled by a safety valve which only allows air to flow to the air drill when the base is firmly fixed to the surface to be drilled. Standard carriage configuration gives an operating travel of 280mm from base of chuck to surface and with the carriage inverted, it gives 380mm. Carriage is operated by a rack and pinion with 13:1 ratio. The drilling mast is able to be moved left or right by 15° to get into difficult areas. With an air drill fitted – the unit can be used underwater. Battery Drill Attachment requires a torque arm which fits to the side of the carriage, utilising the belt clip attached to the battery. For different types of drilling, there are three kits available:- Kit #1 – drill chuck – for standard drilling with twist drills, holesaws, thread tapping etc. Kit #2 – mini cutter arbour – to accept Drillmate Mini Cutters from 8mm-25.5mm dia. Kit #3 – to accept broach cutters with 19mm shank and a DOC up to 35mm and 40mm Dia. -
The lightweight portable drill press. Weighing just 1.6kg (3lbs). Drillmate adds little weight to your Portable Power Drill with Electric or Air Kit options, but gives you the power to do the job Ergonomically, Safely and Productively. Drillmate with its 14:1 force ratio ensures the correct feed force is applied to the drill bit/cutter being used. With your correct selection of power drill speed to suit material and drill bit/cutter size, holes will be produced with reduced operator effort, increased operator safety and efficiency. See Details Below for your specific Kit# Needs. -
Vac-Force 2000 is a lightweight portable hole cutting machine. This unit consists of a vacuum base to clamp to the surface of the material and an air feed cylinder to push the cutter through without any effort by the operator. It also incorporates a safety valve which will not allow air to be supplied to the drill motor unless it is locked to the surface. Vac-Force 2000 Due to the design, the surface to which the unit will adhere to the surface (does not have to be smooth and flat). Certain surface imperfections causing vacuum losses are tolerated (eg. aluminium tread-plate), due to constant vacuum generation. LIGHTWEIGHT Weighing only approximately 4.5kg the VAC-FORCE 2000 has instant advantages over magnetic based drills which weigh 13.0kg plus and are restricted to ferrous materials. Its lightweight construction enhances its portability, saving time in relocating when cutting multiple holes. Safety cables are not required when operating at heights. The hovercraft effect when the release button is pressed makes centre pop location easy. -
Drillmate Vac-Pad is designed for industrial scale hole drilling. This unit consists of a vacuum base to clamp to the surface of the material. The Vac-Pad has three different options (see below). -
DM100A is a Portable Drill Press designed for pneumatic air drills. Drillmate Pty Ltd is heavily committed to research and development to ensure that the products developed take the “hole making” of the future to its ultimate. Taking into account the changes in attitude to the working environment and the changes of materials required to be drilled. Ergonomic, Safety and Productivity (E.S.P.) has always been paramount in the design of products. This is highlighted in the list of products currently developed and manufactured. Most of which have attracted international markets. -
45 degree Block - tilts worktable to 45 degrees for drilling of mitre joints. -
Worktable - gives greater area to support work piece and works in conjunction with the 45 Degree block -
Features: Premium quality extruded aluminium planks of 225mm W x 50mm D with four (4) internal support channels / riveted end-caps with drainage points / hi-viz yellow side banding / ribbed, non-skid surface / rubber non-skid inserts on underside / meets or exceeds AS1577-1993.